|
|
|
Team Trudeau and The V8's
A few updates on the White Bobcat
So.. there was much rust on the floor boards on the white Bobcat.
This required some welding, because the holes had weakened the structure...
and we did not want the seats falling through.
Very tricky with the welder we had.
Although a MIG, it blew through many times because of the impurities in the
metal, and the fact that it was very thin.
After we welded it all together...
we put fiber glass patches to waterproof it, and rustoleum to make sure the
rust did not return.
After that was taken care of, we needed to pull out the motore because it was
completely blown.
So we pulled it through the hood, transmission and all.
Turned out one of the pistons had a hole in it.
Then of course, we took a break, my brother (owner) is sitting in the empty
hood of the car.
|
|
|
|
